How To Drive A PickUp Truck With A Heavy Load?

Heavy Load, Safe Journey: Navigating the Roads with Confidence in Your Pickup Truck

Operating a pickup truck can be intimidating, especially for those who haven’t spent much time in them before. Many uninitiated drivers have found driving a truck, particularly when towing a load, a difficult task. While there is a learning curve to safely and effectively driving a pickup, it doesn’t have to be as daunting as you might believe. Our team at Chris Nikel Chrysler Jeep Dodge Ram Fiat (CJDRF) have put together this helpful guide, so keep reading for comprehensive information on how to drive a pickup truck with a heavy load.

Load Distribution and Balance

a truck and horses on a dirt road by a beach by Sean Quillen is licensed with Unsplash License

One of the primary reasons people purchase a pickup truck is to haul or tow heavy or oversized objects. If you’ve recently bought a truck, you may be eager to test its limits and start moving things. But before you load your truck’s bed, you must know the correct procedures for proper load distribution and balance. To protect your truck’s bed, you’ll need a bed mat or liner. This safeguards your truck bed from rust and other issues with exposed metal as well as scratches, scuffs, and dents.

You can load your truck safely after installing your bed mat or liner. Place the heaviest items you’re hauling near the truck’s cab, or at the back of the bed. Move the heaviest items to the truck’s center. This will help to distribute your load’s weight evenly across your pickup. The more even the weight distribution, the less wear and tear you’ll exert on your truck’s suspension and drivetrain.

A vital factor in balancing your load’s weight is to place oversized or longer items on either side of the truck’s bed. You should place lighter boxes on top of heavier ones while being careful not to stack them too high. Following these tips will ensure you’re distributing your cargo’s total weight as evenly as possible.

You must understand your truck’s payload when loading your truck bed. According to Kelley Blue Book, a truck’s payload is the maximum total weight it can safely carry. This means that the payload is actually the combined total weight of the truck’s cabin and the load in the bed. Be aware of your truck’s specific payload capacity and never exceed this figure. If you overload your vehicle, you could jeopardize its performance, your safety, and the safety of other road users.

Adjusting Driving Techniques

Once you’ve properly and safely loaded your truck and are ready to move off, you’ll need to adjust your driving techniques. These adjustments are critical when braking and accelerating. While reversing your truck, you’ll likely have a limited field of vision due to your load. If you’re used to driving a smaller vehicle, your field of vision will seem especially restricted. While backup cameras and extended mirrors help, you should reverse slowly and double-check where you’re going.

You should also increase your braking distances when driving with a heavy load. Trucks require more time to come to a complete stop, and this increased stopping distance is even more important when towing or hauling a load. Allow plenty of space between your truck and the vehicle in front of you to keep you and whatever you’re carrying around Broken Arrow safe.

Another adjustment you’ll need to make when driving a truck with a significant load is to use your gas judiciously by accelerating slowly and carefully. The average pickup truck packs a ton of power, especially compared with the average sedan. It’s vital to respect this extra potency and avoid accelerating quickly. Careful acceleration will improve your fuel economy and keep you and your truck safer by preventing skidding and loss of control.  

Because trucks are bigger and longer than other vehicles, you’ll also need to adjust how you turn and maneuver. Taking a turn at too high a speed or too sharp an angle is dangerous, as trucks have less mobility, so this can result in a rollover or accident. Take turns slowly and ensure you consider the extra length of your vehicle. You should complete maneuvers carefully and at low speed, or you’ll risk an accident.

Safe Driving Practices

You must also modify your speed by adjusting your braking, acceleration, and maneuvering. Maintaining a moderate and consistent speed is essential when hauling a load, as this helps you to keep a safe following distance and adapt for longer braking times. Avoiding high speeds will also help prevent extraneous strain on your truck’s suspension and brakes, which could compromise your safety.

Vehicle Maintenance and Inspection

You must check your tire pressure and brakes before hauling a heavy load. Loading your truck with extra weight, even if it’s under the vehicle’s payload capacity, can cause your tires to bulge under the stress. And bulging tires can cause poor steering and handling, increasing your risk of an accident. Consequently, you should check your tires frequently for weight-caused strain and related damage.

You should also inspect your brakes before hauling a heavy load. Regular brake inspections ensure optimal performance and responsiveness when you need it the most. Your brakes are vital when hauling a load, as you’ll experience increased brake times and distances. These inspections, which our professional technicians in the Chris Nikel CJDRF service department can perform for you, are necessary for your safety.

Get Your Next Pickup at Chris Nikel CJDRF

Are you near Tulsa, Oklahoma, or the surrounding area and ready to haul a heavy load? Come down to Chris Nikel CJDRF of Broken Arrow. Our mission is to provide every customer with an easy, hassle-free experience. You can do everything from purchasing and financing to servicing your vehicle at Chris Nikel CJDRF. Regardless of why you come to Chris Nickel, you can do it confidently, knowing you’ll receive the best customer service. Contact us online, call 539-766-8990, or visit us at 2920 N. Aspen Ave., Broken Arrow.

Tags: RAM 1500, RAM towing, Towing, Truck
Posted in RAM, Ram Model Features, RAM Towing Tech, Technology | No Comments »